Welcome to our website !

No-sew Scalloped Shorts

By 08:00 , , ,


Here's what you need for this project:
  • Long high-waist shorts (easily thrifted)
  • Fabric scissors
  • Fabric pen (or Sharpie, as I used)
  • Tape measure
  • Fray Check

Step 1:

Trim the length of the shorts. I did this a couple of times, trying them on after each time to see how the length felt on me. Be sure to save some room for the scallops, they will shorten the length a bit.


Step 2:

Measure the width of the leg. I wanted 3 1/2 scallops across the leg, so I divided this length by 3.5 and found a circular object around the house that matched this diameter. It just so happened that a candid lid worked perfectly. You can always fudge the diameter a little, but if you are going to do this, I suggest using a washable fabric marker rather than a Sharpie for the next step.


Step 3:

Trace the circular object across the width of the fronts and backs of each leg. A fabric pen would probably be better for this step, but I had confidence!!


Step 4:

Use super sharp fabric scissors to carefully cut on the inside of where you drew the semi-circles. I definitely suggest cutting the fronts and the backs separately to avoid any tragic mistakes.


Step 5:

Add a light coat of fray check to the edge of the shorts. When it dries, trim any slightly uneven spots or frays that are hanging out.

For this project, you can also use a long pair of pants.


Source
Image

You Might Also Like

0 comments